News and Technical Guides

Technical insights on steel products, processing and standards: selection criteria, tolerances and practical guidance from our technical office.

Hardox is genuine when the ID stamped on the plate matches

Genuine Hardox: matching the plate ID to the 3.1 certificate

Red primer proves little: Hardox is genuine when the ID stamped on the plate matches SSAB’s 3.1 certificate, a link that cutting to drawing breaks

Technical drawing of four steel plate samples side by side, with a Brinell hardness indentation and a material certificate

Hardox 400 equivalent: XAR 400, NM400 or T1?

T1 is a structural steel, Hardox and XAR are brands, and NM400 is a Chinese standard grade. Guarantees, certificates and 2026 EU import rules compared.

Technical drawing of a bolted wear plate being measured with an ultrasonic thickness gauge

Year-end shutdown: wear parts to replace and when to order them | Solsider

At the December shutdown, the part to replace is the one that, at the wear rate measured between two readings, would not make it to the next shutdown.

Technical drawing of a twin-shaft shredder with a hopper lined with bolted wear plates and a Hardox roll-off container

Hardox in recycling: which grade for each component | Solsider

In the same shredder, the knife and the rotor need different Hardox grades: the knife must hold its edge, the rotor must absorb impact.

Technical drawing of a cross-section of Hardox wear plate with the indentation left by a Brinell hardness test

Hardox steel: what it is and how hard each grade is | Solsider

Hardox is SSAB's wear plate, hard right through to the core. The grade number is its nominal Brinell hardness, not a quality rating.

Hardox wear-resistant steel plate oxyfuel-cut to drawing for components exposed to abrasion

Selecting the hardness grade in Hardox wear-resistant steels

Hardox 450 or 500: how the wear mechanism, the return on each hardness step and workshop processing determine the correct grade for each application.

CNC cutting torch in action on steel plate with sparks during processing

Selecting the thermal cutting process for steel plate

Laser, plasma or oxyfuel: how thickness, EN ISO 9013 quality class and downstream processing determine the cutting process and the cost of cutting to drawing.

Steel plates and sections stacked in a warehouse during delivery weight inspection

Theoretical and actual weight of steel products

Why calculated weight and delivered weight differ even on compliant supplies: calculation basis, tolerances by product family and the verification procedure.

Calculate
Call